Ask people what they hate about wiper blades and you'll hear the same thing. Standing in a parking lot, holding a bag of plastic adapters, trying to figure out which one fits your arm and how the old blade comes off.
When Anthony and Arthur Leardi started Clix, they read thousands of one-star reviews of competing brands. Installation was the complaint that kept coming up, according to our family history. So they built our one-click system around it.
The idea in one sentence
You install a small Starter Clip on your wiper arm one time, and after that every Clix blade clicks on and off in seconds.
That's it. The clip stays on the arm. The blade is the part you replace.

Why it's different from a normal wiper
Most blades come with a handful of adapters in the box, and you're supposed to work out which one matches your arm. Back in 2021, Anthony told National Oil and Lube News that many brands pack four or five adapters, which turns a quick job into a confusing one. A Clix pack at the time came with two clips, plus X-factor clips available for the rarest arms.
Our 2018 launch announcement put it simply: anyone should be able to replace their own blades in under 10 seconds. That's after the clip is on.
Before you start
- Order by vehicle. Put your year, make and model into the vehicle finder. You'll get the right blade sizes for both sides.
- Look at your arm. Before you take the old blade off, look at how it attaches and snap a photo. PartOtter's wiper guide suggests the same thing. The most common arm is a J-hook, a U-shaped hook at the end of the arm. Some cars use a pin, side-lock, push-button or bayonet arm.
Step by step
-
Pick the right Starter Clip
Different arms take different clips. The off-road retailer NVMOS lists clip types like the C-Clip, X-Clip and X2-Clip, chosen by arm type. AutoZone's listing for the 20-inch Cyber blade shows C and L adapters, for J-hook, pinch tab, and 16mm and 19mm top-button arms.
-
Take the old blade off
Lift the wiper arm away from the glass and remove the old blade the way it came on.
-
Put the Starter Clip on the arm
This is the one-time step. Fit the Starter Clip onto the end of the wiper arm until it's seated. Reviewer Jeremy at Roadway Ready has a J-hook arm on his Toyota Sienna and said the adapter "clipped right on."
-
Click the blade on
Line the blade up with the Starter Clip and push until it clicks. That's how NVMOS describes it in its install steps too.
-
Lower the arm and test
Set the arm back down gently and run the washer fluid to test a wipe.
How long does it take?
The first time, give yourself a few minutes per side. Jeremy said his first install took about five minutes out of the box, because the clip had to go on first.

Every time after that, it's a click. Pop the old blade off the Starter Clip, click the new one on.
If it doesn't go smoothly
Some people do hit a snag. One AutoZone reviewer with a 2012 Mini Cooper said the install wasn't as easy as promised, and a customer on our site with a Mini Countryman said it took a little trouble before it clicked. If you're stuck:
- Watch the install video for your arm type. There's one for side-pin arms on our YouTube channel, and more on clixauto.com.
- Check that you're using the right clip for your arm.
- Email us at service@clixauto.com with your year, make and model and a photo of the arm.
Swapping colors later
Because the clip stays on, changing your look takes as long as changing a blade. Got a new color in mind? Click the old one off and the new one on.
The fine print
Clix fits most vehicles — check yours with the vehicle finder. Every set of wipers ships free. If the fit isn't right or you just don't like them, you have 30 days to return them.